IEEE Four Node Networks

The IEEE Four Node Test Feeder provides a simple system for testing three-phase two-winding transformer connections. The newtork consists of four nodes, 2 line segments and a three-phase transformer bank connected between the two segments. The variants of this network comprise transformer step-up/ step-down configuration, balanced/ un-balanced loading and transformer winding connections/ vector groups. Following transformer connection variant are available in step-up and step-down configuration, balanced and unbalanced loading.

  • Grounded Wye - Grounded Wye

  • Grounded Wye - Delta

  • Ungrounded Wye - Delta

  • Delta - Grounded Wye

  • Delta - Delta

Note

Open Winding transformers are currently not supported by power-grid-model, therefore, these variants are currently not available for loading.

All available variants are included in the IeeeFourNodeVariant enum. See API Documentation for more details.

Warning

As power-grid-model does not directly support delta-connected load, an additional ideal dy transformer is added to model the delta-connected loads. Accordingly, the additional node with id 10 and transformer with id 11, included in ynd, yd, dd transformers are virtual node and transformer, and are not relevant in the context of original IEEE Four Node Networks.

Data Source

The network data, wire data and standard results are all obtained from the publically available datasets of IEEE at IEEE PES Test Feeders. The converted network models are loaded to power-grid-model and power flow results are validated against the results published by the IEEE.