Pandapower converter
Pandapower converter can convert the pandapower net
to power-grid-model input data.
It also converts the power flow output of power-grid-model into the res_*
Dataframes in the pandapower net
.
The converter can be used in a similar way as described in Converters.
Modelling differences
The user must be aware of following unsupported features or differences in conversion. Currently, the conversions only support powerflow calculations and their relevant attributes. Any feature involving a PV bus, ie. generator, DC line are unsupported as of now.
Load
Delta type of loads, type="delta"
are not supported in power-grid-model.
Switch
The features regarding in_ka
and z_ohm
attributes are currently unsupported.
External grid
The external grid is modelled with a source impedance all sequence components in power-grid-model. Whereas it is only present in negative and zero sequence networks in pandapower. Hence, this impedance value has to be mentioned in the power-flow calculation when using the power-grid-model power flow calculation.
Transformer
Custom zero sequence parameters in transformers are not supported.
The same ones as positive sequence admittance is used in power-grid-model.
The changing of impedance by the means of characteristics in net.characteristic
is not directly supported.
The phase shift in angle by transforermers by the shift_degree
attribute only supports clock values in PGM.
The tap_phase_shifter
transformer and shifting of angles with tap via tap_step_degree
are features not added in power-grid-model yet.
The default for transformer model to be used in pandapower is t
model but power-grid-model supports only pi
model of transformer hence this may create a minor difference calculation.
Three winding transformer
The differences defined in Transformer are applicable here as well.
Additionally, tap connection at star point, ie. tap_at_star_point
is not supported.